Prod-#
|
Product
name |
Unit
|
Description |
Product
|
10
|
MM-Degreaser
Z, liquid |
1000
ml
|
MM-Degreaser
Z is an universal solvent for degreasing metallic, plastic
and other surfaces. Before
the application of PolymerMetals there is mostly a surface
preparation of the concerned work piece required to evoke
a good bonding between the PolymerMetal and the ground
material. Along with those requirements goes the cleaning
of the surface. MM-Degreaser
Z offers
a high degreasing potential against grease and oil, facilitates
a wide range of application and can
be applied by brush. |
|
11
|
MM-Degreaser
Z, liquid |
250
ml
|
14
|
MM-Release
agent, liquid |
100
ml
|
MM-Release
agent prevents the adhesion between PolymerMetals and
the surface of the base material. MM-Release agent can
e.g. be applied by brush. |
|
33
|
Mixing
plate (synthetic material) |
20
x 12 cm
|
The
mixing plate is suitable as useful and Die Mischplatte
eignet sich als praktische und handy working substrate
to strike out the mixed components before applying them on
the final work piece which shall be coated. |
|
16
|
Mixing
stick (stainless steel) |
pc
|
Useful
tool for taking pasty or soft-pasty components out of the
tins, for mixing the components e.g. within the mixing
cup and for applying the mixture on the workpiece. |
|
15
|
Mixing
cup (synthetic material) |
pc
|
Small
(Oneway)-Container to mix two components. |
|
25
|
Measuring
spoon red |
set
|
Finding
the right mixing ratio for smaller portions whenever
Hardener red is envolved. The bigger spoon is used for
the base component and the smaller one for
the Hardener red. Spoons must always be
filled levelled. |
|
26
|
Measuring
spoon yellow |
set
|
Finding
the right mixing ratio for smaller portions whenever
Hardener yellow, XETEX BD or Molymetall is envolved.
The bigger spoon is used for the base component and the
smaller
one for
the
Hardener
component. Spoons must always be filled levelled. |
|
29
|
Measuring
spoon VP 10-500 |
set
|
Useful
for smaller portions
of VP 10-500. Spoons
must always be filled levelled. |
|
18
|
Fabric
tape (stainless steel) |
100
x 10 cm
|
Fabric
tapes and mats increase the stability and strength
of a repair area when combined
with PolymerMetals.
In
addition, with the help of fabric tapes and mats,
PolymerMetals can be applied to areas where otherwise
this wouldn’t be possible due to missing supporting
surfaces (e.g. larger leakages or cracks). |
|
20
|
Fabric
tape (glass fibre) |
1000
x 5 cm
|
|
22
|
Fabric
mat (glass fibre) |
30
x 40 cm
|
|
23
|
Application
roller |
pc
|
Can be used to
spread the
coating material evenly on to the fabric mats or tapes and
to massage it in. At the same time troubling air pockets
in the even soft PolymerMetal are avoided / removed. |
|
34
|
Temperature
indicator (one-way) |
15
pc
|
These
self adhesive one-way measuring temperature indicators
are only used together with the hot-hardening material
VP 10-500 and they help to indicate the maximum temperature
of ~
150 °C, when VP 10-500 should be applied. |
|